Sound Storm Laboratories CAP200S 2 Farad Capacitor with Digital Voltmeter, Silver Graphic
Sound Storm Laboratories CAP200S 2 Farad Capacitor with Digital Voltmeter, Silver Graphic
Sound Storm – click on the image below for more information.
- Capacitance: 2,000,000 mF
- Capacitance tolerance: +/-10%
- Working Voltage range: 20 VDC
- Surge: 24 Volt
- ESR: <0.00195 Ohm @120 Hz, 25°C
- Capacitance: 2,000,000 mFCapacitance tolerance: +/-10%Working Voltage range: 20 VDCSurge: 24 Volt
- ESR: <0.00195 Ohm @120 Hz, 25°CChrome Plated Posts3-Digit, super bright red LED Voltage meter
- Mounting Brackets and Hardware Included Dimensions: 10-5/16″ H (including terminal) x 3″ D
Sound Storm
Much like a reservoir is filled with water to accommodate when there is a spike in the needs of a community; the expanded line of Sound Storm capacitors will store power for when your electrical system requires it most – especially during long bass notes. If you are experiencing dimming headlights every time your subwoofers roar, or the bass notes seem weaker than they should be, it could be an indicator that SSL capacitors should be added to your installation. The chrome plated posts of the CAP
Click on the button for more Sound Storm information and reviews.
Got over 100 reviews to choose the best headphone
Sound Storm Laboratories SWK8 Complete 8 Gauge Amplifier Installation Kit
Sound Storm – click on the image below for more information.
- 20 ft. 8 Gauge red power cable
- 3 ft. 8 Gauge black ground cable
- 16 ft. 18 Gauge blue turn-on wire
- 20 ft. High performance RCA interconnect
- 30 ft. Speaker wire
- 20 ft. 8 Gauge red power cable Competition high-quality fuse holder3 ft. 8 Gauge black ground cable16 ft. 18 Gauge blue turn-on wire20 ft. High performance RCA interconnect
- 30 ft. Speaker wire6 ft. Split loom tubing (20) 4″ Wire ties (3) Rubber grommets
- #10 Gold-plated ring terminal 5/16″ Gold-plated ring terminal 1/4″ Gold-plated ring terminal
Sound Storm
Sound Storm amplifier installation kits provide you with the necessary cables, interconnects, tubing, and wire ties used in the typical installation scenario. For technical questions about this product please visit our website, soundstormlab.com, or call a technician at 888.38.STORM. When it comes to building an impressive and affordable home-quality theater in your vehicle, Sound Storm is your solution. Let us prove to you that…everything else is just noise.
Sound Storm Laboratories SWK8 Complete 8 Gauge Amplifier Installation Kit
Click on the button for more Sound Storm information and reviews.
Click here to get More info and see Over 100 customer reviews
Breakin in a sound storm lab sub with an autotek amp only give it about 1/4 the power. lookin to upgrade to a cheap evo3000 ampplifier.
-
MTX Audio TN12-04 12″ Single 4 ohm Terminator Series Subwoofer MTX – click on the image... Read Full Story » -
Kenwood KDC-X796 In-Dash USB/CD Receiver with Bluetooth/HD Radio Kenwood – click on the... Read Full Story » -
Koolertron Parking radar with 4 sensors + Compatible with TFT LCD monitor Koolertron – click... Read Full Story » -
Pioneer DEH-P9400BH CD Receiver Pioneer Music Player – click on the image below for more... Read Full Story » -
MTX001770C SW Poster MTX001770 RevC 8 /04 Part#xxxxx SUPER WOOFERS SEE THE WORLD’S GREATEST... Read Full Story »
