Your new liner is custom molded to fit your vehicle. Upon removal from the box your liner will not completely unroll and lay flat. This is normal and only temporary. Just place the liner on the floor or in the back of your vehicle with a weight in each corner (a book works well). After about 15 minutes, your liner will remain flat. In colder climates this “relaxing” may take longer; moving the liner inside will speed up the process. Your liner is manufactured using an engineering resin that... Read Full Story
Follow carefully the instructions listed on these pages and use the template provided, do not over tighten bolts. Do not use silicone on any connections, use mastic. Ensure that safe work practices are followed when installing your Airflow Snorkel. Protective ear and eye wear should be worn at all times when using power tools.
(more…) Read Full Story
1. Disconnect the negative battery terminal to prevent an accidental short circuit.
2. If equipped with center speaker: Unclip and remove the grille. Remove (4) Phillips screws securing the speaker. Unplug and remove the speaker. Unclip the panel above the radio including the a/c vents, then unplug hazard switch and remove.
3. Unclip the panel above the radio including the a/c vents, then unplug hazard switch and remove. Unclip the panel below the radio including the climate controls... Read Full Story
A clutch is needed because the engine spins all the time, but the car's wheels do not in your Nissan Maxima as in other cars. To enable a car come to halt without the engine getting switched off, the wheels have to be disengaged from the engine. By controlling the slippage between them the presence of a clutch allows us to smoothly engage a spinning engine to a non-spinning transmission. Read Full Story
A clutch is needed because the engine spins all the time, but the car's wheels do not in your Nissan Maxima as in other cars. To enable a car come to halt without the engine getting switched off, the wheels have to be disengaged from the engine. By controlling the slippage between them the presence of a clutch allows us to smoothly engage a spinning engine to a non-spinning transmission. Read Full Story
The oil filter keeps your oil clear of dirt so that it can properly lubricate the engine. Internal-combustion engines require an oil filter in the automobile. Don't forget to replace your oil filter frequently if you want to keep your car running efficiently. Read Full Story
The oil filter keeps your oil clear of dirt so that it can properly lubricate the engine. Internal-combustion engines require an oil filter in the automobile. Don't forget to replace your oil filter frequently if you want to keep your car running efficiently. Read Full Story
The front fascia and tie down brackets are removed for baseplate installation. Tie down brackets will not be reinstalled. No drilling necessary. The BX8869 is available for the vehicle. Attachment Tabs are 22 inches center to center and a height of 15 5/8 inches.
1. Remove two phillips screws from under fascia corner, just forward of front tire, both sides.
2. Remove five push pins from bottom of fascia.
3. Just forward of front tires, inside fender, on fascia corner are two metric bolts... Read Full Story
Should I buy an 04 Nissan Maxima or an 03 Toyota Celica?—By Brian
I’m 18 years-old and I have a choice on purchasing 1 of these cars. I have to pay for the insurance and gas on it (and $100 a month to my parents for the loan). Anyway, I only work part time at my [...] Read Full Story
This guide is designed to help you select and properly install a child safety seat compatible with your 2008-2009 Nissan Altima Coupe. To compile this list, our safety engineers fitted numerous Child Restraint Systems (CRS), including infant restraints, forward-facing child seats, booster seats and their combinations.
1 Using a non-slip mat can help stabilize the CRS against the vehicle’s seat bottom and seatback, especially on a slick seating surface, such as leather. Kitchen cabinet liner... Read Full Story
