High Frequency Waveform Generator

Waveform generator is very useful in electronic experiment and design. This circuit generate sine wave oscillation, but actually we can modify the circuit to generate triangle or square wave function. Lets see its schematic diagram first, here it is:

The core of this waveform generator is MAX038. This integrated circuit chip gives complete function to build a waveform generator/function generator.  Here some of modifications that can be used to build a complete waveform generator circuit:

• The circuit can be used to generate square wave, triangle, or sine wave by programming the pin  inputs (A0:pin 3, A1:pin 4).
  • A0  A1                     WAVEFORM
  • X     1                         Sine wave
  • 0     0                         Square wave
  • 1      0                        Triangle wave
• The frequency can be controlled using current. If we disconnect the 20k RIN from REF (pin 1)  and connect it to a DAC, then we can control the frequency using microcontroller or digital interface. We can even control the chip using a quartz crystal (PLL) by controlling the current using a phase comparator output that compares the sync output (pin 14 of MAX038) and a reference clock from quartz crystal oscillator.

This waveform generator integrated circuit chip is very interesting since it can generate 0.1Hz to 20MHz,  very wide operating frequency, as expected for every waveform generator instruments. [Circuit's schematic diagram source:  MAXIM Integrated Products Application Notes]

Possibly Related Articles:

• VFC110: Single Chip High-Frequency Voltage-to-Frequency Converter (VFC)
  Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V...
• High Precision Voltage-to-Frequency Converter (VFC) Using CA3130 Op-Amps
  Voltage to frequency is very useful in many situation, such as transmitting temperature measurement using standard voice radio transceiver. This circuit (see the circuit's schematic diagram) uses only two CA3130...
• Function Generator Using CA3080 and CA3130 Op-Amps
  The schematic diagram shown in the figure below show a function generator circuit using CA3130 in the integrator the threshold detection sections. Both triangular and square-wave signal are available from...
• Pulse Generator (Oscillator) With Adjustable On-Off Period Using CA3130 Op-Amp
  One of the interesting features of CA3130 op-amp  is its high input resistance, because using such high  input resistance, we can build an astable multivibrator with high R/C ratios. The...
• Frequency To Voltage Converter: Change Your Voltmeter To Frequency Meter
  Frequency meter can be used in speed sensor, tachometer, or any measurement of repetitive signals. This frequency to voltage converter (FVC) can be used to turn your analog or digital...