Variable Frequency Sinewave Generator

This sine wave generator is adjustable between 15 Hz to 150 kHz. The circuit is basically a Wien-bridge oscillator, with multiple capacitor selection. Here is the schematic diagram:

A stereo 10k potentiometer is used to control the frequency. The dashed line connecting these two potentiometers show that both potentiometer has single axis.

Possibly Related Articles:

• High Frequency Waveform Generator
  Waveform generator is very useful in electronic experiment and design. This circuit generate sine wave oscillation, but actually we can modify the circuit to generate triangle or square wave function....
• VFC110: Single Chip High-Frequency Voltage-to-Frequency Converter (VFC)
  Using VFC110 chip, we can build a high frequency voltage-to-frequency converter. The features of this chip include the capability of high frequency operation, disable function, and an on-board precision 5V...
• Function Generator Using CA3080 and CA3130 Op-Amps
  The schematic diagram shown in the figure below show a function generator circuit using CA3130 in the integrator the threshold detection sections. Both triangular and square-wave signal are available from...
• Pulse Generator (Oscillator) With Adjustable On-Off Period Using CA3130 Op-Amp
  One of the interesting features of CA3130 op-amp  is its high input resistance, because using such high  input resistance, we can build an astable multivibrator with high R/C ratios. The...
• Frequency To Voltage Converter: Change Your Voltmeter To Frequency Meter
  Frequency meter can be used in speed sensor, tachometer, or any measurement of repetitive signals. This frequency to voltage converter (FVC) can be used to turn your analog or digital...